PROCESS - INSTALLATIONS : HANDLING
Post Hoist for small load :
HANDLING POST HOIST
FIXED or with MANUAL or MOTORIZED PIVOTING Design & fabrication in compliance with FDA & BPF requirements Pharmaceutical finishing of the covered unit: Brushing at Ra 1,73 < Ra < 1,82 µm COLUMN Manufactured from two parallel U-shape sections fixed with welded intermediate beams, closed on the back side with removable 1.4301 stainless steel covers and a flexible protecting band on the front side. -Column height 2520 to 4650 mm -Maxi load at 1 M 600 kgs -Floor type 250 daN/m² mini -Lifting travel 1550 to 3720 mm -Post hoist fixed into the floor with anchoring bolts and fastening resin -Motorization on top under stainless steel cover -Up / Down travel speed : about 4 m/min -Power box : energy supply 400 V Tri + 50 Hz no neutral power 1,5 kW -Energy supply from the ceiling -Control console integrated into the column, manufactured in 1.4301 stainless steel OPTION : Fall guard safety device in case of chain breaking (APAVES approved) FORK Stainless steel 1.4301 Length and width adapted to loads to be lifted
Post Hoist for drums tipping :
COLUMN Manufactured from two parallel U-shape sections fixed with welded intermediate beams, closed on the back side with removable 1.4301 stainless steel covers and a flexible protecting band on the front side. -Column height 2000 mm -Maxi load at 315 mm 100 kgs -Floor type 250 daN/m² mini -Lifting travel 1000 mm -Right or left turn-up 135° -Up-travel speed 4,8 m/min -Rotating speed 4,8 trs/min -Control console integrated into the mast Energy supply 400 V Tri + 50 Hz no neutral Power 1,5 kW -Post hoist fixed into the floor with anchoring bolts and fastening resin -Energy supply from the floor -Control panel on pivoting arm, operation through Operator’s continuous action on push-button. POST HOIST FOR LEFT OR RIGHT TIPPING REVERSIBLE DEVICE USED FOR BAGS OR DRUMS REMOVABLE WITHOUT TOOLING Design & Fabrication in compliance with F.D.A. & B.P.F. requirements Pharmaceutical finishing of the covered unit : Brushing at Ra 1,73 to 1,82 µm BEARER 1.4301 stainless steel construction Length and width according drums and bags to be handled.
Post Hoist for heavy load :
HANDLING POST HOIST FIXED or with MANUAL or MOTORIZED PIVOTING Design & fabrication in compliance with FDA & BPF requirements Pharmaceutical finishing of the covered unit: Brushing at Ra 1,73 < Ra < 1,82 µm COLUMN Manufactured from two parallel U-shape sections fixed with welded intermediate beams, closed on the back side with removable 1.4301 stainless steel covers and a flexible protecting band on the frond side. -Column height 3900 to 6500 mm -Maxi load at 1 M 1800 kgs -Floor type 250 daN/m² mini -Lifting travel 2400 to 4400 mm -Post hoist fixed into the floor with anchoring bolts and fastening resin, and installation relief from the top. -Motorization on top under stainless steel cover -Up / Down travel speed : about 4 m/min -Power box : energy supply 400 V Tri + 50 Hz no neutral power 5 kW -Energy supply from the ceiling -Control console integrated into the column, manufactured in 1.4301 stainless steel -Load limiter above 995 kgs OPTIONS : -Fall guard safety device in case of chain breaking (APAVES approved) -No relief from the top, fixed only into the floor FORK Stainless steel 1.4301 Length and width adapted to loads to be lifted